Allen Bradley PLC

Terminal Base, Flex I/O, 36 I/O Terminals, 2 Common Terminals, 2 +Voltage Terminals, Grounded, Screw-Clamp Terminals, Open Style, DIN Mount, IP20

Product Description:

Our Bulletin Basic Switched Mode Power Supplies are available in 24V DC sizes from 1.5.
20A. These power supplies are cost-effective, provide efficiency up to 95.2%, and are rated for long service life.

• Available in 1.5A (36 Watts), 2.5A (60 Watts), 3.75A (90 Watts), 5A (120 Watts), 10A (240 Watts) and 20A (480 Watts) sizes
• Designed for extended mean time between failure for longer service at a significant price advantage
• Includes single-board design that enables up to 95.2% efficiency, and reduces heat output which can put less thermal stress on other components in the enclosure
• Provides a DC-OK signal which allows the ability to monitor the output voltage of the unit
• Clicks smoothly onto any standard DIN rail and features large-sized terminals which makes wiring easier

Rockwell Automation announces that as of June 30, 2020, the CompactLogix L43 2MB Memory Controller will be discontinued and no longer available for sale. Customers are encouraged to remove references to the affected product(s).

End Cap, Right, CompactLogix, Terminator, Operating Temperature 0╝C to 60╝C (32╝F to +140╝F)
communication bus on a controller from the Allen-Bradley 1769 Compact I/O product line.

Controller, ControlLogix, 32 MB User Memory, 0.98MKB I/O Memory, USB Port, 500 Controller Connections, 4 Character Alpha/Numeric Display, 5ma @ 1.2VDC, 800ma @ 5.1VDC

Power Supply Bundle, ControlLogix, AC, 85-265V AC Input, 2 Redundant Supplies, With 2 Cables and Chassis Adaptor

Terminal Base, Flex I/O, 32 I/O Terminals, 8 Common Terminals, 8 +Voltage Terminals, Screw-Clamp, Open Style, DIN Mount, IP20

753 AC Packaged Drive, Air Cooled, Open Type, 400 VAC, 3 PH, 30 Amps, 15kW ND, 11kW HD, AC In w/ Prchg, see More Info, Frame 3, EMC Filter, DB Transistor, Blank (No HIM), No Option, No Option, No Option, No Option, No Option, Carton & Documents

PanelView 800 7-Inch HMI Terminal with 65K Colors, Touch Screen TFT.Serial, Ethernet &USB ports.256 MB of Internal Storage and RAM

MicroLogix 1400, 12 digital fast 24V dc inputs, 8 digital normal 24V dc inputs, 12 relays outputs, 4 Analog (12 bits) inputs, 2 Analog (12 bits) outputs, 110/240V ac power

1762-IQ8OW6

 

Revisions: Ser A Description: The Allen-Bradley 1762-IQ8OW6 is a MicroLogix 1200 combination I/O module. This module features Eight (8) sink / source input channels that accepts 10…30V DC @ 30 °C (86 °F) and 10…26.4V DC @ 65 °C (149 °F) input voltage range. It also has Six (6) Form A relay output channels with operating voltage range of 5-265VAC and 5-125V DC. This module is compatible for use with MicroLogix 1100, 1200, and1400.

Input Module, Flex I/O, Analog, Current or Voltage, 12 Channels Single Ended Input, Open Style, DIN Mount, IP20

The most outstanding features of this 1606-XLS DIN-rail power supply are the high efficiency and the small size, which are achieved by a synchronous rectification and further novel design details. With short-term peak power capability of 150% and built-in large sized output capacitors, these features help start motors, charge capacitors and absorb reverse energy and often allow a unit of a lower wattage class to be used. High immunity to transients and power surges as well as low electromagnetic emission makes usage in nearly every environment possible. The integrated output power manager, a wide range input voltage design and virtually no input inrush current make installation and usage simple. Diagnostics are easy due to the dry DC-ok contact, a green DC-ok LED and red overload LED. Unique quick-connect spring-clamp terminals allow a safe and fast installation and a large international approval package for a variety of applications makes this unit suitable for nearly every situation

MicroLogix 1400, 12 digital fast 24V dc inputs, 8 digital normal 24V dc inputs, 12 relays outputs, 4 Analog (12 bits) inputs, 2 Analog (12 bits) outputs, 110/240V ac power

Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

1734-AENTR

evisions: Ser A Ser B Description: The Allen-Bradley 1734-AENTR is a Point I/O Dual Ethernet communication module. It supports Ring, Star, and Tree Topology and transmission speed of 10/100 Mbits/s in Half or Full-Duplex mode. This module supports DIN rail mounting and requires 24 Volts DC Input Voltage.In Stock Ships TodayRequest a quote for 1734-AENTR 

Mechanical

1756-A7

 

Revisions: Ser A Ser B Ser C Description: The Allen-Bradley/Rockwell Automation 1756-A7 chassis is a small and compact chassis that is made for the Allen-Bradley ControlLogix systems. This chassis is one of the smallest ControlLogix chassis that is available and it has only 2 mounting tabs on the top and only 2 mounting tabs on the bottom. The 1756-A7 chassis can be installed with or without 2 SEM screws, but if it is installed without the SEM screws, then it needs 2 star washers in addition to 2 flat washers and 2 split-lock washers. Additionally, this chassis needs 4 Phillips screws if it does not have SEM screws, but it only needs 2 Phillips screws if it is used with SEM screws. The 1756-A7 chassis is open equipment which does not have an enclosure for protection.

1794-OB32P

 

Revisions: Ser A Description: The 1794-OB32P is an Allen-Bradley Flex I/O electronically protected discrete output module. This module comes with individual channel protection, having thirty-two (32) 24 Volt DC sourcing output channels. It is compatible for use with the 1794-TB32 and 1794-TB32S terminal base units. It has an output current rating of 14.0 Amperes per module, with 6 Amperes total for channels 0...15 and 8 Amperes total for channels 16-31

The Allen-Bradley 1756-BA2 3-Volt Lithium PLC Battery is a replacement lithium battery manufactured by Allen-Bradley/Rockwell Automation. It is used in Allen-Bradley 1756-L6x devices, specifically devices in Series B and in the Allen-Bradley ControlLogix 5561, 5562, 5563, and 5564 Series B drives as well as in industrial computers and logic controllers which are programmable. This PLC (Premature Capacity Loss) Lithium battery is composed of only 1 lithium cell. It has a stable voltage as well as a broad ambient operating temperature range. The low self-discharge rate of the Allen-Bradley 1756-BA2 3-Volt Lithium PLC Battery gives this cell a shelf life of about 10 years.

 

The nominal capacity of the Allen-Bradley 1756-BA2 Lithium PLC Battery is 1200 mAh (milliamp Hour). This means that starting from a fully charged state, 1200 mAh of electricity can be withdrawn from the battery at a particular constant current. The voltage of this cell is 3.0 Volts, which expresses the strength of the battery itself. The cell has dimensions of .68 inches x 1.38 inches. The Allen-Bradley 1756-BA2 3-Volt Lithium PLC Battery has an excellent battery life. For example, when operating at a temperature of 41 to 45 degrees Celsius and a power cycle of 3 cycles per day, the cell works for 12 weeks if it is used for a 1MB project (the BAT status indicator turns red to indicate a low battery). It will last for 26 weeks if it completes 16 MB projects with a power cycle of 1 cycle per month and operating temperatures of 0 to 21 degrees Celsius. The Allen-Bradley 1756-BA2 3-Volt Lithium PLC Battery is an ideal battery for industrial computers and logic controllers because of its specific advantages. These include its high performance level, its ease to use in most environments, and its ability to perform standard and safety controls in the same chassis for a truly integrated system. 

HOT TAGS : AB 1756-BA2 Battery Assembly AB 1756-BA2 1756-BA2 Battery Assembly 1756-BA2 1756-BA2 Allen-Bradley 1756 BA2Leave A Message

 

Allen Bradley Programmable Logic Controller CPU, 14 Inputs, 10 Outputs - Micro870 Series - 2080-LC70-24QBB
Increase the performance speeds of your automated system with this PLC (programmable logic controller) from Rockwell Automation's Allen Bradley range. It has 128kB of memory, so it can support complex programmes and user-defined functions to efficiently meet the demands of your setup. Built-in Ethernet, Serial and USB connectivity means it's compatible with commonly used peripherals and network devices. Its 24V source solid-state output ports minimise the response times of connected machines.
• Supports Ladder Diagram, Structured Text and Function Block programming languages to display processes to suit your application
• Operating temperature range between -20°C and +65°C for use in demanding environments
• Removable terminal block design reduces wiring time for easy installation
Standards and Certifications
• UKCA (UK Conformity Assessed)
• CE (Conformitè Europëenne)
• UL (Underwriters' Laboratories)
What are solid-state output ports and how do they benefit my application?
Meet operational needs by scaling machine with support for up to eight expansion I/O modules and 304 digital I/O points
Program devices and connect to HMI effortlessly through EtherNet/IP
Control drives and communicate to other controllers with ease using symbolic addressing with client messaging
Shorten machine development time with up to 280 KB memory size and support for up to 20,000 programming steps
Reduce wiring time with removable terminal blocks
In a PLC, output ports operate physical devices in response to information arriving at the input modules. They come in solid-state and relay types. Solid-state output ports contain no moving parts, meaning their response times are quicker and they don't suffer any mechanical wear over time.

Product DescriptionThe 25B-D4P0N104 is an AC drive that belongs to the PowerFlex drive series. It is manufactured by Allen Bradley. The 25B-D4P0N104 is a three-phase device with a 480 Volt AC voltage rating. It has a 4-Ampere current rating and is rated for an average of 2 Horsepower. This module also has an output voltage rating of 480 Volts AC. It comes inside a Size A-Frame and its enclosure is UL-NEMA Open Type and is rated as IP20, meaning that it is not protected from liquids. This AC drive has a Fixed terminal connection and panel mounting capabilities.The 25B-D4P0N104 has a running frequency of 50 to 60 Hertz. This module is known for its flexibility and enhanced performance; it is an industry-grade device and is widely used in large-scale factories. On the front panel of the drive is a Human-Module Interface (HMI) through various inputs can be fed into the drive. This unit comes with a keypad for additional input, which also allows a user to select items and navigate the small LED screen. There is a Power button to switch on and off the power. It has an Ethernet port and a USB port for communication purpose. It is 6.77 inches in length, 2.83 inches wide, and 5.98 inches high. The 25B-D4P0N104 has passed various certification standards, such as C-TICK, CE, KC, MARINE, and more. It features different motor control options, such as Volts per hertz control, Sensorless Vector control, and Closed-loop velocity control. IGBT braking comes as a standard braking option.The 25B-D4P0N104 is part of Allen-Bradley’s PowerFlex 525 Product catalog. This PowerFlex 525 is Allen-Bradley’s solution for advanced motor controls in a rugged, compact and small footprint assembly. This drive has embedded features such as an integral filter and brake resistor, increasing the cost-effectiveness of the drive. It also comes with an embedded Keypad and LCD readout that is used for out-of-the-box configuration and operation of the drive. Embedded communication interface is Ethernet I/P communication port and RS485 / DSI communication.This drive is a Frame A drive which means it may be installed using a standard DIN Rail or screw mounted to an enclosure subpanel. It also supports zero stacking installation at an ambient temperature of 45 Degree Celsius. With Zero stacking, enclosure space is maximized thus, reducing panel size and increasing installation costs.